TINA/Spice/LMR16006XEVM: Pspice simulation model library provided by TI is not working.

Dhanraj

Guru 14805 points

Part Number: LMR16006XEVM
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Hello,

I am trying to do simulation of LMR16006X ,BUT I think the model library provided by Ti is not correct.

because I am not getting proper output in Pspice simulation.

I have attached the pspice model downloaded from ti.LMR16006X_Unencrypted_PSpice_Transient_Model.zip

here is my ckt

anyone help me to figureout the issue.

Regards

over 7 years ago

0 Britt Brooks - Online Design Tools over 7 years ago

TI__Mastermind 41310 points

Dhanraj,

I did not have any issues simulating the circuit in PSpice, however, I used the reference design (STARTUP) that is in the product folder. I also added a simple 1K resistor as a load for the output. Here is the circuit:

I am attaching the .zip file with the circuit as well.

LMR16006X_PSPICE_TRANS.zip

The simulation does take a little while to complete but the output is at 3.3V.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LMR16006XEVM: Pspice simulation model library provided by TI is not working.