This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/OPA2132: Convergence Problem

Part Number: OPA2132
Other Parts Discussed in Thread: TINA-TI, , OPA132

Tool/software: TINA-TI or Spice Models


I have multiple convergence problems in TINA TI related to the OPA2132 model from TI.

I reports convergence problems in DE, DC

I am trying to run a temperature simulation on a circuit between -40 to +85 deg C using 3 points.

As the model is encrypted are there some standard setting s in the simulator to overcome this problem and get the simulation moving?

Thanks in advance

Best regards