This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/LMV652: Spice model doesn't behave as the datasheet for frequency response

Part Number: LMV652
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

Hello there,

I am trying to verify the open-loop transfer function on the LMV652 opamp model to design a compensation network for it to drive a capacitive load.

The datasheet bode plots for the open-loop transfer functions do not match the bode plots I am getting from TINA model.

 While what I am getting from TINA is

for 10 Ohm load resistor


And for 2K Ohm load


Could you please let me know how to drive the model to get results similar to the datasheet?