• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 717 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PMP15002: The reference desing using UCC28700 and UCC24636

takahiko yokota
Mastermind 7135 points
Part Number: PMP15002
Other Parts Discussed in Thread: UCC24636, UCC28704, UCC28700, , UCC24610

Hi

My customer will design 12W power surpply with high efficiency and small footprint.
they think using UCC28704 or UCC28700 and UCC24636.
I found PMP15002 using UCC28704.
Are there the reference design using UCC28700 and UCC24636?


Best regards,
Yokota

  • 0
    TI__Expert 7395 points

    Yokota-san,

    Thanks for your interest here. 

    If you have not seen already please also look at these designs:

    I'm not sure of your application but UCC28704 can support high efficiency even without Synchronous Rectification so a diode rectifier with UCC28704 might also be an option for you.

    I found 1 design with UCC28700 and UCC24610 and have attached the BOM and schematic here. I don't think this design was tested though so can't guarantee performance:

    PMP8504 Rev_A pads.pdf

    PMP8504 Rev_A BOM.pdf