TIDA-01228: tidud25a problem regarding LC sensor

Sai Krishna Vaddadi

Part Number: TIDA-01228

Can we replace the inductor value from 235uH to any other value like 220uH. Or, we need to use only 235uH. Because the 235uH from gemphill technologies is not available from regular vendors like mouser, digi-key.

Please suggest.

over 7 years ago

0 Andy Soukup over 7 years ago

TI__Prodigy 240 points

Hello Sai, the author of this design will be best able to answer your question. He is unavailable this week, though. He can reply to your question next week.

0 Milen over 7 years ago

TI__Intellectual 1915 points

Yes, you can use 220uH or similar value. Keep in mind that the oscillation frequency will lightly change due to the different inductor, so you will need to adjust the number of oscillations and the timeout period.
Regards,
Milen

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01228: tidud25a problem regarding LC sensor