This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/TPS54061: adding more capacitors

Part Number: TPS54061
Other Parts Discussed in Thread: TINA-TI

Tool/software: WEBENCH® Design Tools


Is there a way to modify the amount of input/output capacitors in Webench? When design is launched from product folder, it comes with a some quantity of certain capacitors, like two pieces of C1608X5R1H105K080AB for example. My question is, how can increase the amount of caps to three or more? There used to  be edit-button in schematic view but that has been removed from latest version.




  • Hi Juha,

    I believe you are trying to add more branches to the input/output capacitors. Please let me know if otherwise.The edit button allowed you to add more branches and perform startup simulation for certain devices. However, there is an alternative option - you could click on "Export" and export to the free TINA-TI simulator where you can add more capacitor branches as per your requirements and also do electrical simulations to ensure the design requirements are met. Hope this helps.