Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 851 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-00378: connecting TIDA-00378 with RF Transceiver

TIDA-00378: Appropriate IR LED and photodiode for TIDA-00378 design

Atharva Saraf
Prodigy 50 points
Part Number: TIDA-00378

Hi,

 For TIDA-00378 design,which IR led and photodiode will be appropriate? What should be optimal wavelength of these components?

  • 0
    TI__Mastermind 27191 points
    For this design we re-used the optical chamber, LED, and photodiode of the Sharp dust sensor (GP2Y1010AU0F). The exact part numbers are not known, but based on research papers on this subject, particle sensors like this one use a wavelength of 940nm.