TINA/Spice/OPA627-DIE: OPA627

Jubayer Jalil

Prodigy 200 points

Part Number: OPA627-DIE
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Dear Mr. John,

I have attached a doc file of a circuit where Fig 1 cannot simulate in noise analysis in TINA whereas Fig 2 can.

Can you please help me to sort it out?

Thanks in advance.

regards

4666.Doc3.docx

over 7 years ago

0 Herman Theodorus over 7 years ago

TI__Genius 9775 points

Hi Jubayer,

It seems this is a duplicate post with respect to this post:
e2e.ti.com/.../728766

On that post, John has already replied to you on your last post, so he is waiting for your response. So please help him understand further your problem or try to rephrase your problem from different angles so that he can help further.

Since this is redundant post, I'll close this one.
Herman

0 Jubayer Jalil over 7 years ago in reply to Herman Theodorus

Prodigy 200 points

Dear Mr. Herman,

I already responded to Mr. John regarding the post:

This post is for different circuit topology, where I uploaded different doc file with two circuits and simulation output screen shot. In the doc. file, the circuit of Fig 1 cannot simulate in noise analysis, whereas Fig 2 can.

I have attached the circuits again for your perusal.

Kind regards

Jubayer5280.4666.Doc3.docx

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/OPA627-DIE: OPA627