• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 38 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TINA/Spice/OPA627-DIE: OPA627

TINA/Spice/OPA627-DIE: OPA627

Jubayer Jalil
Prodigy 200 points

Part Number: OPA627-DIE

Tool/software: TINA-TI or Spice Models

Dear Mr. John,

I have attached a doc  file of a circuit where Fig 1 cannot simulate in noise analysis in TINA whereas Fig 2 can.

Can you please help me to sort it out?

Thanks in advance.

regards

4666.Doc3.docx

  • 0
    TI__Genius 9775 points
    Hi Jubayer,

    It seems this is a duplicate post with respect to this post:
    e2e.ti.com/.../728766

    On that post, John has already replied to you on your last post, so he is waiting for your response. So please help him understand further your problem or try to rephrase your problem from different angles so that he can help further.

    Since this is redundant post, I'll close this one.
    Herman
  • 0 in reply to Herman Theodorus
    Prodigy 200 points

    Dear Mr. Herman,

    I already responded to Mr. John regarding the post:

    This post is for different circuit topology, where I uploaded different doc file with two circuits and simulation output screen shot. In the doc. file, the circuit of Fig 1 cannot simulate in noise analysis, whereas Fig 2 can.

    I have attached the circuits again for your perusal. 

    Kind regards

    Jubayer5280.4666.Doc3.docx