TINA/Spice/TIDA-00807: Information regarding schematic diagram

Hello Deepak

Good to know you are working on fault indicator.

I would believe you referred to the design guide and may be you would see the design in pats.

http://www.ti.com/tool/TIDA-00807

Please click the TI design link and scroll down to the design files section

You will find the PDF and altium files for the complete design.

We additionally have another design for Over head fault indicator you can look at

http://www.ti.com/tool/TIDA-00998

Thanks

Sreenivasa

Hello sir
I got the altium design files,thanks for helping.
But i have one more query .
I am not being able to find how can I burn my code into the microprocessor as it is without launchpad.
Thanks
Deepak

Hello Deepak
Good to hear you found the design files.
Please look at J1, it is the programming connector.
The design uses 2-wire JTAG interface referred to as Spy-Bi-Wire (SBW) for programming.
There is lot of help you can use to understand programming.
Alternatively, please open a new thread with title as MSP430 programming to get help from the relevant FAE.
Thanks
Sreenivasa

Hello sir

Thanks a lot for giving reply.

But sir I have never used a JTAG interface.  Is it a hardware device which can be directly connected to J1 and its other end can be directly connected to PC using USB

And it can be bought from texas instrument?

Thanks

Hi Deepak,

The following emulator tool can be ordered from ti.com for debugging and programming:

Link: http://www.ti.com/tool/MSP-FET

As per my colleague's reply to your query above, kindly raise a thread on the MSP430 forum for any further queries on MSP430 programming.

Link to MSP430 forum: e2e.ti.com/.../166

Thanks,
Harsh