TIDA-01436: Compatability

Smrithy Krishnan

Prodigy 150 points

Part Number: TIDA-01436
Other Parts Discussed in Thread: TMDSEVM437X

Can we use Beaglebone board instead of TMDSEVM437X for people counting.

over 6 years ago

0 clam over 6 years ago

TI__Expert 8785 points

Please see this link: http://software-dl.ti.com/processor-sdk-linux/esd/docs/05_01_00_11/linux/Examples_and_Demos.html

It shows which EVM can run the "Simple People Tracking" demo with ToF using the Processor Linux SDK. BeagleBone Black is supported. Section 1 from the provided link will provide more information on how to load the Processor Linux SDK binaries onto BBB.

0 Smrithy Krishnan over 6 years ago in reply to clam

Prodigy 150 points

Hi,

While going through section 1 of the link there is a run setup script,there is clearing the emmc there is to remove or replace MLO. But when i plug the BBB with the usb privided I can't find any MLO file

0 clam over 6 years ago in reply to Smrithy Krishnan

TI__Expert 8785 points

Are you still having issues with flashing? In your other post, I saw that you were able to run the Arago distribution.

If you are still having issues, Section 1.1.5 says to remove or rename the MLO to prevent the Angstrom distribution from running. You do not need to replace it with another file. Once Angstrom is not running, it will be able to boot from the SD card that was created by the setup script.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01436: Compatability