• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 354 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-01436: Compatability

TIDA-01436: Transfer of images

Smrithy Krishnan
Prodigy 150 points
Part Number: TIDA-01436
Other Parts Discussed in Thread: OPT8241,

Hi,

I am working on the people counting application using OPT8241 sensor and beaglebone black.For that I created an sd card with processor linux sdk and booted using ubuntu.In one point the guide is saying to view .png generated images winscp is used.How can we transfer the images using winscp and where we can view the generated images.I have downloaded the winscp and connected to the board using ethernet,the picture is attached to this.

Regards

Smrithy

  • 0
    TI__Expert 8785 points
    Please see Section 4.2.3 from the TIDA-01436 design guide. It provides the command line options to save as png. It also says the pngs will be saved in the same directory that the application is being run from.

    --Christina