• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 548 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-01495: TIDA-01495

TIDA-01495: TIDA-01495

Ch Ramakrishna
Prodigy 240 points

Part Number: TIDA-01495

We are planning to modify this design to work with output 28 V and Current 24A..

Please suggest suitable changes to incorporate with the above required output level

  • 0
    TI__Expert 3860 points
    Hi Ramakrishna,

    This will change the magnetic components and power components. Even the PFC section will get changed, as the power has increased. Please go through the design guide and use the design procedure given in it to modify the components according to your specifications.

    Regards,

    Salil