The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/TMS470MF06607: TMS470MF06607

Part Number: TMS470MF06607
Other Parts Discussed in Thread: TMS570LS0432

Tool/software: WEBENCH® Design Tools

HI,

I am working on TMS470MFO6607 MCU development stick, I have installed the software given int he DVD and connected the TMS470M usb stick to PC with the given usb cable and tried to launch the safety MCU demos ,but when I clicked on temperature sensor it giving a warning message as shown in the screen shot i have attached,and  I clicked on yes then it stated erasing and after that it started showing programming continuously, and I observed power led(white)  and err led(red) glowing on the TMS470MFO6607 MCU development stick. Can u please help to solve this problem so that I would be able to check safety MCU demos.