TIDA-01495: increasing the power rating

Shreenidhi Patil

Expert 3126 points

Part Number: TIDA-01495
Other Parts Discussed in Thread: UCC28063A

Hello Ram sir ,

customer is planning to increase the maximum power rating of TIDA-01495 by an additional 100W .

Do you think the design and topology selected can still support .

over 5 years ago

0 Salil over 5 years ago

TI__Expert 3860 points

Hi Shreenidhi,

The topology can support additional 100W power. The design methodology will still work.

Regards,

Salil

0 balasubramani r over 5 years ago in reply to Salil

Expert 1170 points

Hi Salil,

To increase the power rating , what are all the components will change. What are all the critical section to be taking care of.

0 Salil over 5 years ago in reply to balasubramani r

TI__Expert 3860 points

Hi Balasubramani,

All the components in the power path will change - The input filter, bridge rectifier, boost inductors, MOSFETs, rectifier diodes and output capacitor will change. Please follow the design procedure as illustrated in the design guide and the datasheet of UCC28063A.

Regards,

Salil

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-01495: increasing the power rating