The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/TPS54623: Tina simulation result couldn't match webench design

Part Number: TPS54623
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models


I used TI webench tool to design a circuit for 12V input 5V 5A output with TPS54623, but the webench circuit cannot get the correct voltage output with Tina simulation. See the attachments, anything wrong? Thanks.


  • Hi,

    Kindly do not put extra effort in designing the TINA-TI schematic as per WEBENCH design. This may cause some mistake during designing. 

    We have TINA-TI export available in WEBENCH designer tool. Kindly follow the below steps to get exported WEBENCH design in TINA-TI.

    1. Provide input/output conditions and click on Open Design.

    2. A new window will open. Click on EXPORT on right top corner. Then choose TINA-TI and finally click on EXPORT DESIGN.

    3. When the export is completed, you will be notified to download the TINA-TI .TSC file. Please download it and simulate.

    Kindly let us know if you face any issue/mismatch in simulation result.

    Thanks & Regards,

    Arpan Gupta