PMP8583: EVM Borrowing

hideyuki sakai

Mastermind 6250 points

Part Number: PMP8583
Other Parts Discussed in Thread: UCC28910, UCC28910FBEVM-526

Dear, Sir.

I am facing a quite conservative customer that he dont want to change to new device.

However, he is interested in PMP8583 Reference Design, so mentioning that it was

possible to evaluate UCC28910 if PMP8583 was obtained. Because the spec is almost

same as his expectation.

Input : AC 220V

Output : 12V/0.5A

Is it possible to borrow PMP8583 for us to elevate his interesting?

Best Regards,

H. Sakai

over 4 years ago

0 Peter Meaney over 4 years ago

TI__Mastermind 31580 points

Hi Hideyuki-san,

I have copied my colleagues in the low to medium power team on your request. This team is based in the US and are on vacation until Monday and will pick up the post then.

Regards

Peter

0 hideyuki sakai over 4 years ago in reply to Peter Meaney

Mastermind 6250 points

Dear, Peter-san.

Thank you so much for your kindly reply.

I will wait for your feedback in next week.

Best Regards,

H. Sakai

0 Eric Faraci over 4 years ago in reply to hideyuki sakai

TI__Expert 8210 points

Hideyuki-san

TI reference designs like PMP8583 are not publicly available. The fastest way for your customer to test this board is to modify the online orderable EVM UCC28910FBEVM-526 to have the components used in PMP8583. If you need to modify the design further we recommend using our excel design calculator www.ti.com/.../sluc503

If you would still like a custom built PMP8583 please reach out to your local TI sale representative. I cannot guarantee that TI will be able to provide a board, but your local TI sale representative will be able to confirm.

Best Regards,
Eric

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP8583: EVM Borrowing