• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/DRV2624EVM-CT: Launch Haptic Control Console support

Bdirdon
Prodigy 10 points
Part Number: DRV2624EVM-CT
Other Parts Discussed in Thread: USB2ANY

Tool/software: WEBENCH® Design Tools

Hi Support member,

Launch Haptic Control Console 1.5.4 could not use Windows 10.

Pls update software.

Regards

  • 0
    TI__Guru* 84915 points
    Hi!

    Welcome to E2E and thank you for your interest in our products!

    Unfortunately, the Windows 10 drivers haven't been developed for some of our EVMs. The only evaluation modules supported in Windows 10 are those that require the USB2ANY tool to work ( www.ti.com/.../slou502a.pdf ). Otherwise, you would need to use the software with older versions.

    We will notify you once the drivers are developed and released.

    Sorry for the inconveniences.

    Best regards,
    Luis Fernando Rodríguez S.