This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01605: A little confused about the SiC MOSFET gate driver in TI designs TIDA-01605 and PMP21553

  • Hello,

    Actually if you look at the main parts of the schematics (PMP21533 and TIDA-01605) they are pretty similar.

    Both use the UCC215xx isolated dual gate driver and the SN650x for the push pull power supply.

    There are some differences in the gate drive resistors and turn off diodes (mostly due to different engineers).

    The big difference is the TIDA-01605 uses the ISO7721 to implement FAULT and RST Signals.

    Hopefully this helps ease the concerns.

    Thanks,

    Robert