• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 407 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-01281: TIDA-01281

CCS/TIDA-01281: TIDA-01281

Saibaba Tandle
Prodigy 70 points
Part Number: TIDA-01281
Other Parts Discussed in Thread: TMDSCNCD28035, TIDM-02002

Tool/software: Code Composer Studio

Hello Experts,

Need Suggestion

I am working on TIDA-00951 Bi-Directional DC-DC converter, After going through the required modules, thought to replace TIDA-01281 (Control Card) with TMDSDOCK28035 (Control card), Instead of designing Tida-01281 from scratch, i can implement readymade module TMDSDOCK28035.

1) will TMDSDOCK28035 module be compatible as TiDA-01281 module to use in TIDA-00951 Design??

2) while searching for the reference programming code of TIDA-01281 (PWM and mode(Buck-Boost) tansition code), i have been through TI Cloud Tool

(  http://dev.ti.com/tirex/explore/node?compilers=ccs&node=AEJ1q-KSYhfHJA7dS5liIg__5C6SEVO__LATEST&resourceClasses=example  ), 

in the preceding link i got a code for TIDM-02002-CLLLC: Bi-directional Resonant Dual Active Bridge (Example code), as it has coded for F28004X mcu family, can i use it in F2803X family (TMS320F28035PAGTR)?

3) Do i have to configure any parameters of it?

pls suggest me any related programming code for TIDA-01281 module, your suggestioun would be highly appreciated!!

Looking forward to your reply..

Best Regards,

SAIBABA TANDLE

  • 0
    TI__Expert 6190 points

    Hi, Saibaba

    I guess you want to build the design of TIDA-00951, and TIDA-1281 is used as daughter card on it.

    TIDA-1281 is nearly with TMDSCNCD28035, but its connector is different, and TIDA-1281 included some isolated communication circuits. You can use TMDSCNCD28035 to replace the TIDA-1281 in TIDA-00951, and change the its connector  interface correspondingly and keeping the same pin map of F28035.

    If you want to build TIDA-00951, you should apply firmware access on the design page of TIDA-00951 (not TIDA-1281 design page), and i Think TIDM-02002's firmware should not appliable to TIDA-00951 hardware. the power stage are totally different.

    Thanks for your question.