This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/LM5180: TINA model doesn't working properly

Part Number: LM5180
Other Parts Discussed in Thread: TIDA-010006

Tool/software: WEBENCH® Design Tools

Hello, I used LM5180 TINA model which is found in the link below.

https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/p/814419/3026928?tisearch=e2e-sitesearch&keymatch=LM5180#3026928

I draw a circuit which is almost same with TIDA-010006 with 24V input and 15V,-5V outputs expected.

when I tried steady-state analysis, there's no errors but 0V ouputs.

and when I tried transiet analysis, there's an error message "Node: 133 Component/Terminals: .U1 X_U1_U101.COUNT_RE_INT ". 

how can I fix it?