PMP20195: LM5021MM-2

Neil Henry

Intellectual 965 points

Part Number: PMP20195

Hello,

I am working off the PMP20195 reference design.

Can you all suggest alternatives to RLTI-1177 Transformer,330 uH, TH?

We are looking for a cost effective Transformer, off the shelf!

In addition, can you provide the PMP20195 Schematic in Eagle format. Trying to speed up time to market.

Best Regards,

Neil Henry

over 4 years ago

0 Robert Taylor1 over 4 years ago

TI__Expert 5815 points

Hi Neil,

Same response here as the other post.

Except contact Ian at Renco for the transformer

Ian Rensing <IRensing@rencousa.com>

Thanks,

Robert

0 Neil Henry over 4 years ago in reply to Robert Taylor1

Intellectual 965 points

Robert,

What is the fuse that fits XF1 fuse Holder? Not seeing the LittleFuse part number?

Thanks,

Neil

0 Robert Taylor1 over 4 years ago in reply to Neil Henry

TI__Expert 5815 points

Hi Neil,

Looks like the holder is for a TR5 type of fuse. I could not find the exact part number that was used on the design. I would say a 3A fuse should work well. Usually we are using the slow blow type as this is just for catastrophic protection.

Thanks,

Robert

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP20195: LM5021MM-2