• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/UCC28C40: Simulation, hardware & system design tools forum

sergio Rodriguez
Prodigy 10 points
Part Number: UCC28C40
Other Parts Discussed in Thread: UCC28C42

Tool/software: WEBENCH® Design Tools

Hi,

I am trying to simulate with tina a WeBench design with UCC28C42 chip. The purpose of the design is to simulate a flyback converter, which Vin can be from 100 to 400DC, Vout=24Vdc and Iout=2A.

The problem is that I have copied all the design of the WeBench in tina and it does not work, and I do not know why it does not work because y put the same parameters. Can you help me?

I attach the tina program here for you to watch.

Thanks

SergioFLYBACK_UCC28C42.TSC