WEBENCH® Tools/UCC28631: Simulate the attached design report generated from Webench tool. ( TINA Software is used )

SHREYAS S BAGI

Part Number: UCC28631

Tool/software: WEBENCH® Design Tools

Hi,

In TINA I want to simulate the attached design report generated from Webench tool. I want to simulate a Flyback Converter with AC input voltage 300V to 400V and DC Output 24V @ 2A.

Questions :

1. Can I simulate the attached Design in TINA?

2. Is there any sample or example circuit available for my Design AC input voltage 300V to 400 and DC Output 24V @ 2A?

4278.WBDesign24.pdf

over 4 years ago

0 Bhushan Waghmare over 4 years ago

TI__Expert 3320 points

Hi Shreyas,

Webench do not support electrical simulation for UCC28631. I have forwarded the query for TINA model support to concerned team. We will get back to you soon.

Best Regards,

Bhushan

0 Eric Faraci over 4 years ago in reply to Bhushan Waghmare

TI__Expert 8210 points

Shreyas

Unfortunately we do not have a simulation model of UCC28631 that you can use to simulate this design.

We also do not have a reference design that is close to your design specifications. The design you have created in webench is the best example design that we have.

Best Regards,

Eric

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/UCC28631: Simulate the attached design report generated from Webench tool. ( TINA Software is used )