PMP21455: Wrong schematic symbol in reference design

Lukas Kostorz

Part Number: PMP21455

Dear Sir or Madame,

I have built your reference design and during that process noticed that the schematic symbol (pinout) for the transformer is wrong at least for the secondary side.

Could you confirm?

Best regards

Lukas

over 4 years ago

0 Sheng-yang Yu1 over 4 years ago

TI__Expert 4110 points

Lukas,

You are right! The transformer secondary pin out # on the schematic is wrong. The actual pin out should follow Wurth 750316908 Rev.01 attached.

We will update PMP21455 schematic pin out # in the nearly future.

Thanks and regards,

Sheng-Yang Yu750316908r01 Spec.pdf

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

PMP21455: Wrong schematic symbol in reference design