• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-00721: Some questions about TIDA-00721

Naizeng Wang
Expert 3735 points
Part Number: TIDA-00721
Other Parts Discussed in Thread: RF430CL330H

Hi team,

Customer is evaluating our TIDA-00721. Their questions are summarized as below:

1. Do they need to power on the VCC? Because in some NFC, there is no need to power on. It can be powered by Induced EMF of RF signal.

2. They short D1 and D2 due to lack of diodes. When the mobile phone approaches the board, there is no reflection of the APP. Why?

3. Are there Chinese colleagues can support this case so that we can talk on Wechat?

Br,

Nison

  • 0
    TI__Guru* 90906 points

    Dear Naizeng - 

    Thanks for the post - if customer has built their own copy of this reference example, and they want to power the reference via magnetic field coming from a handset, they do need to populate the diodes, as they serve as a rectifier with which DC is made for powering the board. This would be why it doesn't work with a handset, if the diodes are not there and the pads shorted out. 

    if it helps understand more, here is a video which has an earlier version of this same kind of NFC/RFID based temp sensor "patch" using the RF430CL330H

    https://www.youtube.com/watch?v=E-itH0_TWd4