Tool/software: WEBENCH® Design Tools
The design values for compensation Resistor & capacitors seem to mis-match. I am attaching my calculation sheet do let me know. Attaching my calculation sheetTPS54560BQDDARQ1.xlsx
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: WEBENCH® Design Tools
The design values for compensation Resistor & capacitors seem to mis-match. I am attaching my calculation sheet do let me know. Attaching my calculation sheetTPS54560BQDDARQ1.xlsx
Hi Nidhi,
Could you please share your Webench design with us? We will take a further look into this.
Regards
Vishwanath
Hi Nidhi,
The calculations that you've shared are at FSW 266.125kHz and the design that you've shared is at FSW 355.43kHz. These are 2 distinct designs, We should not be comparing these on a one to one bases. In order to do such comparison of compensation components, you should make sure FSW, L1 and Cout are identical in both designs. Hope this was helpful.
Regards,
Vishwanath