This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-020004: Change to PCB stackup and impedance

Part Number: TIDA-020004


We are manufacting some TIDA-020004 boards to evaluate.

Our PCB manufacturer needed to slightly change the stackup from what TI recommended in the reference design.

They suggested modifying the trace widths and spacing to make sure the impedance is correct, as in attached image

I believe this is okay, but is there any reason this combination of stackup and trace width/spacing would be an issue?