Hello
- This is a 3-phase inverter. Thus it works in 4 quadrants. Naturally we can use it as a rectifier. Correct?
- If we use it as a rectifier and we measure output DC volt and current and use feedback loop, theoretically we should be able control output DC volt and power factor. Correct? If not why?
- If we use it as a rectifier, and assuming 240VAC input, will we be able to control the output DC voltage down to 48VDC?
- If we use it as a rectifier will we be able to control power factor?
- The reference design states that peak power is ~2KW & continuous power is 1.25KW. Do we know the maximum duty cycle or peak power period?
Regards
Sam