TIDA-010025: TMDXCNCD28379D

User 650652049

Part Number: TIDA-010025
Other Parts Discussed in Thread: TMDSCNCD28379D, DESIGNDRIVE

Thanks for the info. I just ordered C2000 DesignDRIVE Development Kit for Industrial Motor Control . Will the controller TMDSCNCD28379D automatically identify all needed motor parameters and give us a tuned and stable commutation and torque control just like TMDSCNCD28069MISO controlCARD with DRV8301 board. Please help.

Also, suggest examples to run BLAC motors with the F28379D controller. Thank you

Thank you.

over 3 years ago

0 Zhenyu (Zhen) Yu over 3 years ago

TI__Intellectual 790 points

A bit confused which exact h/w you have acquired. I'd recommend you to get the IDDK h/w described here: https://www.ti.com/tool/TMDXIDDK379D

After that you should download C2000 MotorControl SDK at: https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

0 Zhenyu (Zhen) Yu over 3 years ago in reply to Zhenyu (Zhen) Yu

TI__Intellectual 790 points

Part of my answer got cut off. About your question on automatic detection of motor parameters, the only solution from TI C2000 that does that is the instaSPIN sensorless FOC solution. You can find the instaSPIN s/w examples also in the MotorControl SDK and also indication what C2000 devices and h/w are supported.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-010025: TMDXCNCD28379D