WEBENCH® Tools/DAC38J82EVM: DAC38J84EVM

BASAVAKIRAN HIREMATH

Prodigy 195 points

Part Number: DAC38J82EVM
Other Parts Discussed in Thread: DAC38J84

Tool/software: WEBENCH® Design Tools

Hi,

Can any one send me DAC3XJ8X GUI software(slac790).

I'm not getting this software in website.

Thanks & Regards

Basavakiran

over 4 years ago

0 Kang Hsia over 4 years ago

TI__Guru 72579 points

Hi,

I answered in the following thread

https://e2e.ti.com/support/tools/sim-hw-system-design/f/234/t/932070

0 Kang Hsia over 4 years ago

TI__Guru 72579 points

Hi,

The link worked fine. Perhaps there are some firewall issues on your side. You may try the software uploaded to E2E belowslac644b.zip

0 BASAVAKIRAN HIREMATH over 4 years ago in reply to Kang Hsia

Prodigy 195 points

Hi,

i installed but here one file is missing(instr.lib) after generation.

thanks

Basavakiran

0 Kang Hsia over 4 years ago in reply to BASAVAKIRAN HIREMATH

TI__Guru 72579 points

Hi,

you will need to plug in the DAC38J84 EVM to the USB port for the PC to first recognize the FTDI2xx driver to proceed with the install of the rest of the libraries.

-Kang

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/DAC38J82EVM: DAC38J84EVM