LOWPASSFILTER-CALC: Fail to Export from Filter Design Tool

joe lindula

Mastermind 6850 points

Part Number: LOWPASSFILTER-CALC
Other Parts Discussed in Thread: TINA-TI

Hello, when I try to Export in the Filter Design Tool it always fails.

over 3 years ago

0 Bhushan Waghmare over 3 years ago

TI__Expert 3320 points

Hi Joe,

Thanks for reaching us out. I have assigned this one to Webench filter design team. We will get back to you in 1-2 days with updates.

Best Regards,

Bhushan

0 Srikanth Pam over 3 years ago in reply to Bhushan Waghmare

TI__Intellectual 1490 points

Hi Joe,

We are able to replicate the issue - thank you for reporting.

Team is working and debugging and fixing the issue, I do not have a timeline estimate at this point of time, I will let you know once I have an estimate on the fix date. Please let us know if there is anything we can do to assist you in near term.

Regards,

Srikanth Pam

0 joe lindula over 3 years ago in reply to Srikanth Pam

Mastermind 6850 points

Thank you very much.

0 Srikanth Pam over 3 years ago in reply to joe lindula

TI__Intellectual 1490 points

Hi Joe,

This issue is fixed - we are now able to successfully export the designs to TINA-TI. Please try it out again and get back to us if you have any issues.

Best Regards,

Srikanth Pam

0 Praveen Badiger over 3 years ago in reply to Srikanth Pam

TI__Expert 8365 points

Hi Joe,

Could you please try again. Please let us know if you are facing any issue?

Thanks & Regards,

Praveen

0 joe lindula over 3 years ago in reply to Praveen Badiger

Mastermind 6850 points

Hello, yes I will try this evening. Thank you

0 joe lindula over 3 years ago in reply to Srikanth Pam

Mastermind 6850 points

All Working Now. Thank you very much.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

LOWPASSFILTER-CALC: Fail to Export from Filter Design Tool