• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 257 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-020032: CAN message transmission from TIDA board

Prasad Pallapu
Intellectual 510 points
Part Number: TIDA-020032

Hello,

We wanted to test CAN messages from TIDA-020032.

Wanted to check with you regarding the test setup.

As soon as connect TIDA-020032 to CANalyzer, and power supply it, do we see the CAN messages with respect to AoA on CANalzer trace window? or Do we need to send any command to initiate the CAN messages from TIDA-020032?

Pls help me answer the above questions

  • 0
    TI__Mastermind 25045 points

    Hello,

    Prasad_Pallapu said:
    As soon as connect TIDA-020032 to CANalyzer, and power supply it, do we see the CAN messages with respect to AoA on CANalzer trace window?

    Did you get the TIDA board from TI? or are you building your own?

    I'm in the process of updating/creating an example that runs on top of the latest SDK (4.40). In the meantime, I strongly recommend you to review the AoA SimpleLink Academy  And if you want to create your own example, this is what you can do:

    1. Start from the rtls_master project and run tasks 1 to 3 (using the SLA).

    2. After you are able to collect AoA samples, then you can integrate the CAN example from this e2e link. 

      Best regards.

        David

  • 0 in reply to DavidL
    Intellectual 510 points

    Hello David,

    We have ordered the TI board, it is in the process of shipping. In the mean time we wanted to understand how we can test.

    Kindly let us know once your update is done.

    Also can you pls comment on my question regarding CAN messages on Trace window?