Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] PSPICE-FOR-TI: What information is needed for troubleshooting?

The necessary information depends on the scenario.

If you have a problem with installation, please share the installation log. Instructions can be found here

If you have successfully installed PSpice for TI, and you now have a licensing error, please check out our FAQs here

If PSpice for TI has crashed while you are using the tool, please follow the instructions here

If you have unexpected results or errors during simulation time, please share your project in a new thread. See instructions on sharing here

In all cases, please check our FAQs here for a possible solution. If you cannot find a solution, please open a new E2E thread describing the issue and be sure to attach all relevant files (as described above). Open a new thread here.

View more PSpice for TI FAQs here