TIDA-050038: Eval kit not powering up

Arun Pant

Part Number: TIDA-050038

Hi,

I got the eval board, but the board is not getting powered, only D4 LED is ON, rest all LEDs D5 & D1 are not turning ON?

What could be the reason, & how to solve this?

Thanks,

Arun Pant

over 3 years ago

0 Emily Kong1 over 3 years ago

TI__Expert 3350 points

Hi Arun,

The D4 LED turning on indicates that the SoM is receiving the expected 5V from the base board. Can you verify you have the appropriate power connectors attached to the board and that the eval board is booting off eMMC (Table 5 of User's Guide)?

Best,

Emily

0 Arun Pant over 3 years ago in reply to Emily Kong1

Prodigy 10 points

Hi,

The voltage at TP 5V0 is measured only 1.41V, the D4 LED is glowing very light, the board is not booting up, D5 doesn't glow, D1 also doesn't turn ON, no data communication on the serial USB cable with laptop. Unable to identify the reason for this?

0 Emily Kong1 over 3 years ago in reply to Arun Pant

TI__Expert 3350 points

Arun,

The SoM board and PMICs are directly powered from the USB Type-C input to the base board. If the SoM is not receiving 5V, there is an issue somewhere between the USB Type-C connection to the DCDC converter (MP8759GD) to the SoM board.

Best,

Emily

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TIDA-050038: Eval kit not powering up