This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-010057: TIDA-010057 CDCE949 config file

Part Number: TIDA-010057
Other Parts Discussed in Thread: CDCE949, CDCEL9XXPROGEVM, CLOCKPRO

I am building a copy of the TIDA-010057 board since it is not for sale. The design guide (TIDUEP0–May 2020) states at page 20 that the config file of the CDCE949 can be found in the design files. I was not able to locate it on the TIDA-010057 page (TIDA-010057 Ultrasound smart probe power supply reference design | TI.com). Could you point me to the location of this file or provide a link to it.

Thanks,

Bart

  • Hi Bart,

    We'll look into this, see what we can find and post you.

    However, the solution may be to just re-create.

    73,
    Timothy

  • Hi Bart,

    The device CDCE949 can be configured and programmed using 2 methods, either using I2C or using external programmer to write to EEPROM using GUI based programmer.

    We have used CDCEL9XXPROGEVM board to program the EEPROM. Below is the link to the hardware.

     https://www.ti.com/tool/CDCEL9XXPROGEVM

    For generating the configuration file using GUI, we have used ClockPro programming software. This is available on TI.com to be downloaded and you can refer to the user guide to generate the config file as shown in the design TIDA-010057.

    https://www.ti.com/tool/CLOCKPRO

    For directly I2C based programming, we have not released anything specific to the design TIDA-010057.

    Thanks & regards,

    Abhishek