• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 235 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: tps7h4001-sp_wca model PSPICE-FOR_TI

John Lally
Intellectual 495 points
Part Number: PSPICE-FOR-TI
Other Parts Discussed in Thread: TPS7H4001-SP, TPS7H4010-SEP

I just loaded PSPICE-FOR-TI to simulate the TPS7H4001-SP.  I followed the instructions in slvuc15, TPS7H4001-SP Worst Case Analysis Model User's Guide. However I'm unable to find the tps7h4001-sp_wca in the library.  See screen shot attached.  The parts in library skip from TPS7H3301_OLB to TPS7H4010-SEP_AVG.  Also shown in the screen shot is the Pspice for TI Version and the Model Library version.

Please advise as to how I can find the tps7h4001-sp_wca model in PSPICE-FOR-TI.

Thank you -John

  • 0
    TI__Mastermind 29035 points

    Hi John,

    Your library is not up-to-date. Please see mine:

    Please close and relaunch PSpice for TI and accept library update if prompted.

    Thanks,
    JC

  • +1 in reply to JC Zhu
    Intellectual 495 points

    Thank you, I updated the library and found the model, but first i had to Enable Customer Experience Improvement Program in Options->Extended_Preferences.  And i also had enabled statistics gathering by Cadence in the pop-up that occurs when click on help.

    Not sure which or both of these enabled the prompting for library update.   When these were not enabled I wasn't prompted for library updates even though my library was out of date, and choosing Reinstall TI models and Libraries in the help tab continued to install the out of date library.

  • 0 in reply to John Lally
    TI__Mastermind 29035 points

    Hi John,

    Reinstall TI models and Libraries in the help tab only install the base library. We rely on the library update function to bring you the latest models incrementally to avoid consuming bandwidth unnecessarily.

    I do not believe those options are necessary to enable the library update.

    Regards,
    JC