• TIDA-00951: Firmware or Flow chart of MCU

    Part Number: TIDA-00951 Hi, TIDA-00951 main board prototype has been manufactured with gerber file supplied on the TI web page. I will get PCB prototypes of TIDA-01141 Currrent Measurement Module, TIDA-01159 Gate Drive Module, and TIDA-01281 Communication…

  • CCS/TIDA-01580: Help me choose a debugger for CC2640R2 (TIDA-01580)

    Part Number: TIDA-01580 Other Parts Discussed in Thread: CC-DEBUGGER , CC2640R2F Tool/software: Code Composer Studio Who else can advise a debugger for CC2640R2 ? CC-DEBUGGER ? Does it support CC2640R2 ? maybe something newer?

  • WEBENCH® Tools/TMS320C6748: booting issue in NOR flash(MT28EW512ABA1HPN)?

    Part Number: TMS320C6748 Tool/software: WEBENCH® Design Tools Hello sir, We have designed a custom board using TMS320C6748 processor. We have used MT28EW512ABA1HPN NOR flash. We have developed code, tested in debug mode through JTAG. Board is working…

  • RE: Motor Current Signature analysis

    Dear Sir, For predictive mainetence approach i am working with current analysis and vibration for the motor. Starting with Signature analysis do TI provide some application cicuit or IC to have current and volatge to predict load on motors.

  • WEBENCH® Tools/LSF0108: LSF0108 Pull up resistor

    Part Number: LSF0108 Tool/software: WEBENCH® Design Tools My project I would like to use LSF0108 level converter for SPI,I2C,UART ,GPIO pin interfacing with various 5v external module to 3.3V TM4C1294 controller .My doubt is when i need to add pull up…