I am using a model created for PSpice. Yet during simulation, an error message showed up saying only three probes are allowed. I see one of the following errors:
ERROR(ORPSIM-16583): Detected an imported model containing transistors or diodes. For such…
Tool/software: Code Composer Studio Do you have any tricks to help debug exceptions with UIA and CCS's System Analyzer (or RTOS Analyzer)? I'm using TI-RTOS but not sure how to set up the logging.
The license renews automatically every 30 days as long as you are connected to the internet. If you ever get an error about license expiration, simply connect to the internet and you should be able to continue using PSpice for TI.
View more PSpice for…
If you have installed PSpice for TI on less than 3 computers, you can install on an additional machine without issue. If you are already using your license on 3 machines and need to migrate your license from an existing machine to a new one, please click…
The PSpice for TI tool requires you to sync at minimum every 30-days to ensure accuracy of the model library. Please connect to the Internet to sync the tool. If you continue to receive this message, please reach out to our online customer support team…
Your license validation about to expire. You must connect to the internet while using PSpice for TI at least once every 30 days. Please connect to the internet if you are not already online. When you launch PSpice for TI, the licenses will automatically…
Please check if you are connected to Internet. It could be that you had stayed offline for more than 30 days and the license needs to be validated. If you continue to receive this message, you may need to renew your license by logging in on TI.com. If…
Yes. PSpice for TI does need a license to run. This is installed as part of the software installation and it is validated periodically by the PSpice of TI application.
View more PSpice for TI FAQs here
