LAUNCHXL-CC1352P: Launchpad-CC1352P1 : The example projects cannot be run and debugged.

Sunglin Chen

Hi,

I imported the example project: project_zero into the CCS, and then rebuilt it and expected to debug it. It cannot be debugged because the Run and Debug button are always disable. In addition, the firmware has been download to the kit, but it didn't work. What steps I have missed?

Best Regards,

Xview.

over 2 years ago

0 Siri over 2 years ago

TI__Guru* 79271 points

Why this happens is stated in the readme file for the project:

"This project is configured to be managed and launched by the BIM or Boot Image Manager example app. This means that this project does not include a CCFG section to configure the device at boot, and therefore requires that the BIM project is programmed into the device first. "

Please see the BLE5-Stack Quick Start Guiode for more details:

https://dev.ti.com/tirex/explore/node?node=AEswASH3KBcHF-Acj6XlGw__pTTHBmu__LATEST

Siri

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC1352P: Launchpad-CC1352P1 : The example projects cannot be run and debugged.