CC2564: run SPPLEDemo with STM32F4

Susan Yang

Part Number: CC2564

Dear team,

Hardware: CC2564MODNEM+CC256XEM-STADAPT+STM32F407G-DISCOVERY

Software: SPPLEDemo

According to documents（SWRU428 and Enable_STM32_Discovery）, the customer burned SPPLEDemo to the STM32F4 development board. The development board is connected to the computer via the MICRO-B data cable, as shown in the figure below:

But no data was received. Please help to check the issue.

over 2 years ago

0 Jacob B. over 2 years ago

TI__Genius 13052 points

Hi Susan,

The customer may need to use a UART to USB converter on the console TX and RX pins of the Discovery board:

This picture can be found from the STM32F4DISCOVERY user manual.

These E2E threads may also be helpful:

STM32F4Discoveryboard with CC2564 running SPPLEDemo - unable to output to console via virtual com
Enabling STM32f4 discovery with CC2564MODNEM: no com port

Thanks,

Jacob

Bluetooth®︎

Bluetooth forum

CC2564: run SPPLEDemo with STM32F4

STM32F4Discoveryboard with CC2564 running SPPLEDemo - unable to output to console via virtual com

Enabling STM32f4 discovery with CC2564MODNEM: no com port