LAUNCHXL-CC26X2R1: I want simple serial socket example for LAUNCHXL-CC26X2R1 !!

vadivelan selvam

Prodigy 110 points

Part Number: LAUNCHXL-CC26X2R1

I want a simple serial socket example for LAUNCHXL-CC26X2R1 !!

please help me

over 2 years ago

0 Clément over 2 years ago

TI__Guru* 94028 points

Hi,

Please review the following link: github.com/.../ble5apps

Best regards,

0 vadivelan selvam over 2 years ago in reply to Clément

Prodigy 110 points

SDK version is simplelink_cc13x2_26x2_sdk_5_20_00_52

0 Clément over 2 years ago in reply to vadivelan selvam

TI__Guru* 94028 points

Hi,

Little or no change will be required to port the example I have pointed you to from SDK 5.10 to SDK 5.20. You can refer to our migration guide for additional guidance.

Let us know if you run into some issues while doing the porting.

Best regards,

0 vadivelan selvam over 2 years ago in reply to Clément

Prodigy 110 points

ok, I got it,

whenever running debug mode device after gap connect() function gap connect event not generating I added breakpoints even those not able to trace

if non debug mode device connection and discovery devices happening

how to resolve this issue

0 Clément over 2 years ago in reply to vadivelan selvam

TI__Guru* 94028 points

Hi,

Running the code with the debugger and the breakpoints has a significant impact on the timing. As a consequence, I am not too surprised by your observations.

As the code works properly while not in debug mode, you can consider you have properly ported the example. Well done!

Kind regards,

0 vadivelan selvam over 2 years ago in reply to Clément

Prodigy 110 points

how to setup work with debug mode

+1 Clément over 2 years ago in reply to vadivelan selvam

TI__Guru* 94028 points

Hi,

Generally speaking, no BLE example will work properly if the execution is paused. So you can run in debug mode, but avoid using break point. More details are available in our debugging guide.

Best regards,

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC26X2R1: I want simple serial socket example for LAUNCHXL-CC26X2R1 !!