• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 3 answers
  • Subscribers 51 subscribers
  • Views 109 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC2640R2: Example project not building

BRUNO CHAVES
Intellectual 820 points
Part Number: LAUNCHXL-CC2640R2

Hi! 

I'm trying to build simple_peripheral_cc2640r2lp_oad_onchip_app  and the other projetcs related to OAD from simplelink_cc2640r2_sdk_1_50_00_58 using CCS studio, but almost all of them are giving errors. Meanwhile I'm developing another project from the same sdk without any problems. The errors that I got are these:

  • persistent_app_cc2640r2lp:

          

  • simple_peripheral_cc2640r2lp_oad_onchip_stack

  • 0
    TI__Guru* 94058 points

    Hi,

    #35 #error directive: "***BLE USER CONFIG BUILD ERROR*** Unknown package type!"

    That error looks like there are multiple definitions of "CC2640R2_LAUNCHXL" in your project. There is one in CC2640R2_LAUNCHXL.h and I think the other one is defined under Properties->Build->ARM Compiler->Predefined Symbols. Removing one of those defines should fix the BLE user config error message.

    The error is raised by the following code in ble_user_config.h

    // RF Front End Mode and Bias Configuration

#if defined( CC26XX )

#if defined( CC2650EM_7ID )

  #define RF_FE_MODE_AND_BIAS           ( RF_FE_DIFFERENTIAL |                 \
                                          RF_FE_INT_BIAS)

#elif defined( CC2650EM_5XD ) || defined( CC2650EM_4XD ) || defined( CC2650M5A )

  #define RF_FE_MODE_AND_BIAS           ( RF_FE_DIFFERENTIAL |                 \
                                          RF_FE_EXT_BIAS)

#elif defined( CC2650EM_4XS )

  #define RF_FE_MODE_AND_BIAS           ( RF_FE_SINGLE_ENDED_RFP |             \
                                          RF_FE_EXT_BIAS )

#elif defined( CC2640R2EM_CXS )

  #define RF_FE_MODE_AND_BIAS           ( RF_FE_SINGLE_ENDED_RFN |             \
                                          RF_FE_EXT_BIAS )

#else // unknown device package

  #error "***BLE USER CONFIG BUILD ERROR*** Unknown package type!"

#endif // <board>

    Let us know if it helps,

    Best regards,

  • 0 in reply to Clément
    Intellectual 820 points

    Thanks! I'll try this here!

  • 0 in reply to BRUNO CHAVES
    TI__Guru* 94058 points

    Hi,

    If your questions are answered, please make sure to mark the thread as resolved.

    Thank you for your comprehension.

    Best regards,