Is there a method on how to measure and control the power consumption of the module and how to set rf tx power?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
To measure the power consumption, please refer to section 188.8.131.52 of the CC2564MODAEM User's Guide. To set RF Tx power, you can use an HCI command: HCI_VS_DRPb_Set_Power_Vector (0xFD82) in the attached Version Specific HCI User's Guide.