Other Parts Discussed in Thread: CC2652R, CC2640R2F
Hi folks,
Can you help me to understand a thing about differential front end configuration in the CC26XX family?
According to document swra640e at page 7 the differential is configured in this way:
The same is showed on CC2640R2F datasheet at page 43.
As you can see the pin 2 (RF_N) is connected to L1 and C1.
However, on the schematic of the launchpad (CC2640R2F - swrc335 and CC2652R - swrc346a) that information is different.
As you can see the pin 1 (RF_P) is connected to L1 and C1.
Does the position of the pin 1 and pin 2 matters on the design?
Thank you
