The continuous TX method and the Packet TX method we use have no impact on the packet speed other than the frequency of the frequency rating test.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The continuous TX method and the Packet TX method we use have no impact on the packet speed other than the frequency of the frequency rating test.
Hi Holly,
I would not expect any difference if you are using the same PHY and back-to-back packet transmission, continuous method or otherwise. Are you using Smart RF Studio 7 or some other software development solution?
Regards,
Ryan