CC2642R: Test report for QDID 156080

Bert Downing1

Part Number: CC2642R

This question is directly related to this post:

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1036409/cc2642r-qdid-156080-and-tcrl-2021-gatt-4-25

Is there a way to get a list of the tests that TI performed for this QDID? The new TCRL requires that GATT 4/25 be selected. The combination of 4/25 being selected and GATT 4/16 (which was already selected) potentially adds a new test. If I could get a list of tests that were performed I can verify if we need to perform this test or verify if TI already performed the test.

Thanks,

Bert

over 3 years ago

0 Ammar N over 3 years ago

TI__Mastermind 25810 points

Hey Bert,

I've assigned an expert to follow up.

0 Clément over 3 years ago

TI__Guru** 101460 points

Hi Bert,

The list of the tests performed to obtained a QDID can be found by referring the TCRL then applied. For example, QDID 156080 was obtained referring TCRL 2020-1, so you can go on the Bluetooth SIG website (https://www.bluetooth.com/specifications/qualification-test-requirements/) and find the test list.

With that being said, and to avoid any unnecessary work, please make sure to review section §2.1.4 dealing with the applicable TCRL of this app note.

In all the cases, please make sure to reach out to your Bluetooth Qualification Consultant for advice more tight to the specificity or your project.

I hope this will help,

Best regards,

Bluetooth®︎

Bluetooth forum

CC2642R: Test report for QDID 156080