• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 139 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] CC2640R2F: How to merge a Sensor Controller example with simple_peripheral? (step-by-step guide)

CC2640R2F: Mapping between syscfg and sensor controller studio

Dinkar Patel
Prodigy 205 points
Part Number: CC2640R2F
Other Parts Discussed in Thread: SYSCONFIG

Hello,

Linked FAQ is good to merge sensor controller studio, but I want to know that how to manage peripheral pins which define in syscfg with  sensor controller studio?

Thanks,

Dinkar

  • 0
    TI__Guru* 94028 points

    Hi Dinkar,

    Thank you for your message.

    Generally speaking, SysConfig does not allow to configure the pins used by the Sensor Controller. Unless the main processor and the Sensor Controller share a pin - we do have an example showcasing this - I would recommend to make sure to avoid to allocate the pins used by the Sensor Controller using SysConfig.

    I understand this approach is not the most practical. I'll take your remark to make sure we improve our tools.

    Best regards,