Other Parts Discussed in Thread: SYSCONFIG
Please verify that when using CC2642R1FRGZR or CC2642R1TWFRTCRQ1, what changes need to be made? Either hardware or software?
For instance is the Product ID the same? Any other factors to consider?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Please verify that when using CC2642R1FRGZR or CC2642R1TWFRTCRQ1, what changes need to be made? Either hardware or software?
For instance is the Product ID the same? Any other factors to consider?
In general, the devices are pin to pin and the same code works on both devices. I would expect no changes in SW and most likely no changes in HW.
Hi Evan, thanks for the feedback!
So to confirm both devices have the same Product ID?
Lindsey,
The devices are binary compatible and pin for pin. In sysconfig you could change the device ID, but effectively everything is the same minus package itself.