This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F: SmartRF Studio: Which PHY setting for original BLE-Stack

Part Number: CC2640R2F
Other Parts Discussed in Thread: BLE-STACK,

Good day!

Our device is using the CC2640R2F SimplinkSDK ( with the original BLE-Stack (not BLE5-Stack).

Which PHY setting in SmartRF Studio 7 should I use for regulatory testing (i.e., which setting is representative of the original BLE-Stack)?

As a related question, should "Whitening" be enabled or disabled?

Thanks a ton!